![background image](http://html1.mh-extra.com/html/steele-products/2400-psi/2400-psi_owners-manual_1369942009.webp)
Owner’s Manual
2
Operation
9
OPERATING CONNECTIONS
High Pressure Hose
• Attach the high pressure hose to the pressure washer by pulling back on the collar of the quick-connect
coupling on the hose and pushing it over the coupling half on the pressure washer outlet.
NOTE: Do not use pressure hose from another manufacturer.
WATER CONNECTION
Before connecting the garden hose to your pressure washer, run water through the garden hose (not
supplied) to flush out any foreign matter.
• Attach garden hose quick-connect to the garden hose (see below).
• Then attach that to the quick-connect inlet on the pressure washer pump. Make sure it locks into place by
pulling back on the garden hose quick-connect collar and inserting it into the quick-connect inlet.
NOTE:
The water supply must supply a minimum of 4 gpm at 20 PSI, or the pump can be damaged.
PRESSURE WASHER PUMP
High Pressure Hose
Garden Hose
Quick-Connect
Quick-Connect Inlet
Garden
Hose
Detergent
Connection
Thermal Relieve Valve