HEAVY DUTY BULL NOSE FRONT BUMPER
2015-17 CHEVY SILVERADO 25-3500
Page 4 of 6
3/30/17 (DP)
Driver Side Installation Pictured
Front
12mm Bolt Plate
12mm Flat Washer
12mm Nylon Lock Nut
(Fig 8) Reuse (2) factory bumper bolts to attach
Support Bracket to mounting plate on frame
(Fig 6) Attach driver/left Mounting Bracket to frame
WARNING!
Do not crawl under bumper
unless the bumper is properly supported on
blocks or stands or the bumper may fall.
Reuse factory
bumper bolts
Front
Front
(Fig 7) Driver/left Mounting Bracket attached
to frame and pictured from below
12mm x 140mm Hex Bolt
(2) 12mm Flat Washers
12mm Nylon Lock Nut
(2) 12mm x 55mm Hex Bolts
(2) 12mm Flat Washers
To line up Support Bracket
with Frame Bracket
(Fig 9) Frame Brackets installed
Front
12mm Bolt Plate
12mm Flat Washer
12mm Nylon Lock Nut
