20. TO INSTALL THE STEELCRAFT INFANT CARRIER
A
Stand in front of the stroller and pull the fabric back from the
sides of the stroller to expose the stroller hinge. Take one car seat
receiver at a time and insert the receiver into the stroller hinge as
shown. Push on the receiver until you hear a ‘click’ which indicates
the receiver has locked in. Pull up on each receiver to check they
have fully locked in.
Please Note: Fit receivers standing in front of the stroller. Car
seat receivers are marked Left & Right for correct fitting.
B
Face the feet end of the Infant Carrier towards the stroller
backrest. With the Infant Carrier handle in the upright position,
locate the Infant Carrier handle mouldings over the receivers on
either side. Notice the indicator is GREEN.
Receiver
Handle latch
Indicator
44
