20. TO INSTALL THE STEELCRAFT INFANT CARRIER (Cont)
E
Release the handle latches. Then with one hand holding the front
of the Infant Carrier, push the Infant Carrier handle all the way
down until you hear it lock into the receivers. The handle
indicator should now be GREEN and the Infant Carrier should be
locked into the receivers. If the indicator is RED the Infant Carrier
handle is not in the locked position, repeat step D.
IMPORTANT: Ensure that the Infant Carrier is locked into place by
pulling up on both sides. Do not use the Infant Carrier if it is not
correctly installed.
NOTE: Ensure the baby is secured in the Infant Carrier with the
harness at all times. Refer to the Infant Carrier instructions
regarding placing and securing your baby in the Infant Carrier.
The Infant Carrier has been fitted with a hood when using the
stroller. The hood may also be used in the car.
Indicator
46
