HOW TO SET-UP
Access Position
SETTING UP THE HARNESS
A. Sit the Infant Carrier on a flat ground
with the handle rotated fully back to
prevent rocking.
B. Release the buckle and lengthen the
Harness Straps by pressing Harness
Adjuster (under the flap) while grasping
both Shoulder Harness Straps and
pulling out desired amount of slack.
TO REMOVE/FIT CANOPY
A. To remove the Canopy, unclip the
elastic Canopy loops from the cover
strap clips at the handle pivot point.
B. Then pull the plastic canopy frame
out of the mouldings at both sides of
the infant carrier.
C. Fitting the Canopy is the reverse of
the removal procedure.
Elastic Canopy loops must always
be fitted when Canopy is in use.
D. The Canopy can be rotated to cover
the baby or opened by rotating to the
desired position.
Elastic Canopy loops
B.
A.
Lift the Harness Adjuster
up and pull the Harness
Straps to slacken.
15
Summary of Contents for 60/A/2010
Page 55: ...55...