HOW TO INSTALL
23
Pull sash
portion of seat
belt to remove
slack.
F. Engage the seat belt tongue to
the buckle.
G. Pull the slack out of the seat
belt and ensure the base is held
firm against the seat back. If a
lap-sash seat belt is used then
allow the excess sash belt to
feed back in to the retractor.
Then close the Belt cover.
To remove the base from the car, release the seat belt, lift the belt
cover and pull the seat belt out.
NOTE:
If seatbelt loosens refer to page 52 for use of alternative Gated
3-Bar Slide.
Close belt cover
Belt Guide Slots
Summary of Contents for 60/A/2010
Page 55: ...55...