Operation and settings
Migration Manual -en- 2019
Page 26 of 35
Switching the display between centimetres and inches
A selection can be made to have the height displayed in centimetres [cm] or inches [inch]. This selection does
not affect the actual height of the desk.
To change the unit displayed, proceed according to the information in the table below:
Press the memory position buttons
1
,
2
and the desktop Up button at the same
time.
Press and hold this button combination for approx. 3 s.
Release the buttons.
S
and a number such as
7
are indicated on the display.
Press and hold the desktop Up button until
S 5
is displayed.
S 5
is displayed.
Press the memory button.
If the display was previously set to centimetres (cm), it will now be switched
over to inches (inch).
If the display was previously set to inches (inch), it will now be switched
over to centimetres (cm).
Setting the memory position
This function is used to save a specific desktop height. A specific desktop height can be saved for each memory
position button (
1
,
2
,
3, 4
). A maximum of three memory positions can thus be entered.
To save a desktop position, proceed as follows:
Move the desktop to the desktop position you desire.
This desktop position (e.g. 73 cm) is indicated on the display.
Press the memory button.
