CABLE MANAGEMENT
When installing equipment, either on the worksurface or below, be sure that the
connecting cables are free from obstruction. Flex offers a pet cable tray as option
to help manage excess cables/wires on the underside of the worksurface.
WORKSTATION DESIGN TIPS
•
Ensure that power cords for all accessory items – computer, lights, monitors,
etc. – are of sufficient length to reach outlets throughout the range of
worksurface height adjustment. Do not subject the cords to any strain while
height adjustment is taking place.
•
Always check for proper operating clearance before placing any item on,
above or below the worksurface.
•
Please use a volt meter to ensure that every outlet into which a height
adjustable desk will be connected has 120 volts, plus or minus 10 volts,
between the hot and neutral contacts (the parallel openings) BEFORE the
height-adjustable desk is plugged in. If this voltage reading is above 130
volts, please contact the building electrician for correcting the building wiring.
MAINTENANCE AND CLEANING
Regularly clean dust and dirt from lifting columns. To ensure all surfaces are
thoroughly cleaned, make sure the lifting columns are fully extended to their
maximum height. Also, be sure to inspect cables and lifting columns for
damage. Check all connections for both correct function and secure mounting.
Caution:
A damp cloth is recommended. To protect the painted surfaces, use a
cleanser that is not highly alkaline or acidic. A pH-neutral product is ideal.
Note:
Please do not move the desk without help. Refer to the guidelines at the
end of the assembly instructions, or contact your facilities group for assistance.
