Steelcase Flex collection User Manual Download Page 10

This equipment has been tested and found to comply with the limits for a class 
B digital device pursuant to Part 15 for FCC rules. These limits are designed 
to provide reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses and can radiate radio frequency 
energy and, if not installed and used in accordance with the instructions, 
may cause harmful interference to radio communications. However, there is 
no guarantee that interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or television reception, which 
can be determined by turning the equipment off and on, the user is encouraged 
to try to correct the interference by one or more of the following measures:

 

Reorient or relocate the receiving antenna.

 

Increase the separation between the equipment and receiver.

 

Connect the equipment into an outlet or a circuit different from that to which 
the receiver is connected.

 

Consult the dealer or an experienced radio/TV technician for help.

 

Caution:

 changes or modifications not expressly approved by the party 

responsible for compliance could void the user’s authority to operate the 
equipment.

This class B digital apparatus complies with Canadian ICES-003. Cet appareil 
numérique de la classe B est conforme à la norme NMB-003 du Canada.

Summary of Contents for Flex collection












Reviews: