Page 2 of 5
939568006 Rev B
Attach Legs to Cabinet
1.
Remove drawers, doors, and
shelves from cabinet if there are any.
2.
Carefully lay case on it’s back on a
clean, soft surface.
STANDARD
OFFSET (for Shared)
REAR
FRONT
Use the SHADED ( ) holes for attachment.
2
TIP: Place a shim under cabinet
for better access and to allow a
finger hold when unit is ready
to upright.
1
To remove drawers
push lever
down
on one
side, and
up
on the other.
Note: Refer to this graphic to
help determine the orientation
of legs onto the cabinet, and
which holes are to be used.
