Page 4 of 12
939500279 Rev E
3 Opening Unit
2
NOTE:
Assemble as close
to assembled units final
desired location to avoid
moving a heavy unit.
B
T
MC
LC
E
For ease of assembly, it is
recommended to lay down
the end panel (E) as shown.
TURN
CLOCKWISE
1
Cam locks can be seen on the topside of the
bottom shelf when installing the bottom shelf.
Fasten Cam Locks in 6 places
(The cam lock screw needs to be turned
3/4 full turn or 270
o
clockwise for
complete engagement.)
T
MC
LC
B
TURN
CLOCKWISE
TURN
CLOCKWISE
TURN
CLOCKWISE
NOTE:
Before assembling each part, please make
sure cams are parallel to the side of the surface &
pins are nicely screwed with the collar touching the
edge of the part. (See page 3 for proper alignment
of parts)
Use mallet, before tightening cam screws, to bring
parts together and avoid light leaks.
®
Fasten Cam Locks in 9 places
(The cam lock screw needs to be turned
3/4 full turn or 270
o
clockwise for
complete engagement.)
