Page 3 of 4
939500339 Rev D
I
MC
LC
E
I
MO
LC
Fasten Cam Locks in 5 places
(The cam lock screw needs to be turned
3/4 full turn or 270
o
clockwise for
complete engagement.)
2
3
MC
Components
Letter Description
E
Full End Panel
T
Top
MC
Center Shelf
LC
Bottom Shelf Assembly
MO
Short End Panel
I
Back Panel
NOTE: Assemble as close to assembled units final
desired location to avoid moving a heavy unit.
1.
Lower the MC (center shelf) and LC (bottom shelf assembly) onto the I
(back panel) as shown. Make sure pins engage into cams (see page 2 for
alignment of parts). Tighten cam locks.
2.
Tip the unit onto its side with the nine (9) pins pointing up. Lower the E
(full end panel) onto the back panel, center shelf & bottom shelf assembly
as shown. Make sure pins engage into cams (see page 2 for alignment of
parts). Tighten cam locks.
3.
Tip the unit over with the E (full end panel) laying on the floor. Lower
the MO (short end panel) onto the back panel, center shelf & bottom shelf
assembly as shown. Make sure pins engage into cams (see page 2 for
alignment of parts). Tighten cam locks.
Fasten Cam Locks in 6 places
(The cam lock screw needs to be turned
3/4 full turn or 270
o
clockwise for
complete engagement.)
TURN
CLOCKWISE
1
Fasten Cam Locks in 9 places
(The cam lock screw needs to be turned
3/4 full turn or 270
o
clockwise for
complete engagement.)
TURN
CLOCKWISE
TURN
CLOCKWISE
®
