Page 4 of 4
939500339 Rev D
4.
Tip the unit into the upright position. Lower the T (top)
onto the short end panel, full end panel & back panel as
shown. Make sure pins engage into cams (see page 2 for
alignment of parts). Tighten cam locks.
5.
Adjust glides in four (4) places on the bottom of the unit.
Level unit.
4
5
Components
Letter Description
E
Full End Panel
T
Top
MC
Center Shelf
LC
Bottom Shelf Assembly
MO
Short End Panel
I
Back panel
T
Fasten Cam Locks in 7 places
(The cam lock screw needs to be turned
3/4 full turn or 270
o
clockwise for
complete engagement.)
TURN
CLOCKWISE
Level unit by
adjusting glides
in 4 places.
®
