Page 11 of 12
P/N 1439128001
158043 Rev B
®
In some instances, an additional
counterbalance adjustment may be
needed to allow the arm’s instant height
adjustment function to work properly.
If your arm is not staying in position after
performing step 11, tighten the adjustment
screw as shown.
1/8"
M
i
OPTIONAL ADJUSTMENT
7/32"
IMPORTANT!
• Monitor must be on arm
• Arm must be in mount
O
Press the arm down to
approximately parallel
with the desk prior to
turning the strength
adjustment screw.
Depending on the weight of your monitor, you may have to make 15-20 turns.
If the arm drifts downward,
turn the adjustment screw
counter-clockwise.
If the arm drifts upward,
turn the adjustment screw
clockwise.
11
Summary of Contents for CFSTDDUALBAR
