Operation and settings
BA_Activa Lift 2 Elektro ©_D_10_2010
26
www.steelcase-village.de
6.6.3 Adjusting the desk height with the operator panel Memory 4x
Prerequisites for adjusting the height of the desk:
• There should be no error message on the operator panel display (See 7.2 Error messages on
• Persons or objects should not be in the entire lift range e.g. open doors or windows, nor should
objects protrude into the lift range.
• There should be no objects in the lift range of the lift column.
• No one should be on the desk.
• The maximum permissible load capacity of the desk should not be exceeded (see sticker) (See
3.1 Technical data on page 7).
• There should be no heavy loads on the desktop (e.g. devices or large amounts of paper). Heavy
loads make the height adjustment more difficult.
• The desktop must be horizontal. If the floor is uneven, align the desktop via the adjustment
screws on the feet (See 5.4 Height compensation on page 15).
Ensure that the connecting cables for the devices on the desk are long enough.
A lift movement only occurs
• As long as the appropriate button is depressed,
• As long as the maximum permissible load (approx. 75 kg) is not exceeded (See 3.1 Technical
The desk starts up!
CAUTION
Damage to the desktop is possible!
If the desktop only moves on one side, or if desktop movement is not uniform:
Release the button immediately so that movement stops!
Determine the cause in accordance with the troubleshooting table (See 7.2 Error
messages on the display on page 28 and 7.3 Other errors and faults on page 31).
If necessary request a service technician.
Press the "Up" or "Down" button
