Operation and settings
BA_Activa Lift 2 Elektro ©_D_10_2010
25
www.steelcase-village.de
6.6.2 Manual reset - operator panel Memory 4x
A manual reset process must be started in the following cases:
• If the desktop is misadjusted,
• if the previously-configured motor controller is attached to a different desktop.
WARNING
Danger of crushing and shearing!
Do not reach into the movement area.
CAUTION
Damage to the drives is possible!
If there is only movement on one side or if the lift movement is not uniform, inter-
rupt the reset process immediately.
The reset process has now been executed.
If the button is released before the process is completely concluded, the reset process will be interrupted and
must be restarted.
Incorrect
reset process
In the event that the reset process could not be successfully executed, proceed as follows:
Press the "Down" button and keep it
depressed until the lower desktop
position is reached.
Release the "Down" button.
Press the "Down" button and keep it
depressed for approx. 5 sec.
The system moves into the lower limit
position.
Release the "Down" button.
Press the "Up" and "Down" buttons
simultaneously and keep them
depressed for at least 5 seconds
Restart the reset process as described
above
