®
Installing Driveshafts (cont.)
Ensure all driveshafts are inserted into driveshaft tubes.
Tighte
n set screws very tightly with 3mm hex wrench.
8
8
9
Tighten the motor mounting nuts.
9
7
7
Reinstall motor.
10
The alignment of the (2) inner hexagonal driveshafts and the
(1) outer driveshaft / collar needs to be as straight as possible.
It may be necessary to:
1) Loosen the leg mounting screws.
2) Adjust the legs to obtain optimal driveshaft alignment.
3) Tighten the leg mounting screws.
MOUNTING SCREWS
10
Page 20 of 35
004231D Rev T
