BM-18
This document is protected by copyrights.
Copying, using, or distributing without permission of JEI Drilling & Cutting Solutions Ltd is prohibited.
14
3.7. Replacing the roller
3.7.1. Replacing the bevelling roller
Unplug the power cord. Remove the circlip and the roller.
To install the roller, use such a number of 1 mm, 0.5 mm, and 0.2 mm washers to
set the gap to 0.2
–0.6 mm between the roller and the cutting inserts. The number of
washers needed depends on the milling head. Put all unused washers between the
circlip and the roller.
CORRECT
✓
Unused
washers
INCORRECT
×
0.2
–0.6 mm
(collision between
roller and cutting
insert)
Distance
washers
