Instructions for the installer
48
3.3
Fitting the telescopic guides (optional)
Proceed as follows to install:
•
remove the telescopic guides A from the packing and remove all protective film;
•
remove all the accessories that are inside the oven;
•
position the telescopic guide to the required height by coupling the upper side to the frame
(detailed drawing 1) and then rotate it until the lower side couples; repeat this operation for the
opposite side and the other levels;
•
slide the telescopic guides forward and position the chosen accessory as shown in detailed
drawing 2;
•
reinsert the previously removed accessories into the oven.
3.4
Adjustment of the drawer height
The clips of height adjustment are located in the
lower side and at the right and left ends of the
drawer.
By turning the lever A the drawer will raise of
3 mm.
