Instructions for the user
58
PROGRAMMING THE COOKING DURATION
This function is for programming the cooking duration after which the oven switches off
automatically.
Fig. 3
•
Set the required cooking function and temperature using the control
knobs;
•
press the key to enter the programming menu; the display will light up
as shown in Fig. 3;
•
use the
/ keys to set the cooking duration; one press of key
adds one minute cooking time and every twelve minutes one internal
segment illuminates (Fig. 4). After 7 seconds the cooking programme
starts and the symbol
appears.
At the end of the set cooking time, an audible alarm sounds for 7
minutes; the symbol
and the numbers on the dial start to flash,
switching the oven off automatically;
•
press any key to stop the alarm or the key to delete the programme.
Fig. 4
PROGRAMMING THE COOKING DURATION AND COOKING END
This function is for programming the oven to switch on at a set time and switch off
automatically after cooking.
Set the required cooking function and temperature using the control knobs.
In addition to the cooking duration, also set the time the oven is to switch on:
•
press the key to enter the programming menu; the display will light up as shown in Fig. 3
and the symbol
appears;
•
use the
/ keys to set the cooking duration; one press of key
adds one minute
cooking time and every twelve minutes one internal segment illuminates (Fig. 4);
•
press the key again and use the / keys to set the cooking end time (cooking end time
minus cooking duration = cooking start time), the symbol
appears.
After 7 seconds the display shows the current time while the cooking start time and the
cooking duration are shown with the illuminated internal segments, which remain steady
until cooking starts and flash for the duration of the cooking time.
At the set time, the oven switches on automatically; at the end of the set cooking time, an
audible alarm sounds for 7 minutes; the symbols
and the numbers on the dial start to
flash, switching the oven off automatically;
•
press any key to stop the alarm or the key to delete the programme.
Fig. 5 shows a programming example: the current time is 7:06 and cooking
is programmed to start at 8.00 and end at 9.00.
At 8:00, the internal segments between 8 and 9 will start to flash, while the
hour hand will remain still.
Fig. 5