PAGE 4
ST-
4
00 REV A 1/4/17
ST400 CRUISER EDITION WITH BLUETOOTH®, USB, AUX-IN | CHROME
ST
4
00
STEELHORSEAUDIO.COM
8
00
-
823
-
5310
| INFO@
STEELHORSEAUDIO
.COM
Steel Horse Audio #237 | 1540 Main St, Bldg 218 | Windsor, CO 80550
INSTALLATION INSTRUCTIONS
STEP 1
STEP 2
Speaker to Amplifier connection:
Connect the speaker wires to the corresponding wires on the amplifier as follows:
Connect the stripped black wire (-) from the left speaker to the white wire from the amp
Connect the solid black wire (+) from the left speaker to the white/black wire from the amp.
Connect the stripped black wire (-) from the right speaker to the gray (+) wire from the amp.
Connect the solid black wire (+) from the right speaker to the gray/black wire from the amp.
To use AUX-IN:
Connect RCA end to amplifier RCA inputs & other end to
headphone port of your audio device/mobile. Note: Please note with this type of
connection, the audio source will control the volume of the system.
To use BLUETOOTH:
See chart below. Please
also
see
separate
KENWOOD
instructions for more details (Included with your amp)
-CONTINUED-
STEP 3
STEP 4
LEFT SPEAKER (-): Connect the Black wire w/ Gray dash lines (-) to the white/black wire from amp
LEFT SPEAKER (+): Connect the Solid Black wire (+) to the White wire from the amp
RIGHT SPEAKER (-): Connect the Black wire w/ Gray dash lines (-) to the gray/black wire from amp
RIGHT SPEAKER (+): Connect the Solid Black wire (+) to the Gray wire from the amp
