Steel Cucine W7-3, Instruction Manual, Page: 68 / 152

UK
30
Use
Lighting the burners
Each knob indicates the corresponding burner (see "The control panel (Caddie / Swing)" on page
54
and
“The control panel (Green)" on page
58
).
1) Press the knob and turn the indicator to the symbol : the ignition clicks and the pilot light switches on
simultaneously. To generate other discharges, hold down the knob while turning the indicator repeatedly
to the symbol .
2) Once the burner is lit, turn the indicator to position . Release the knob: the burner is now on the
maximum setting.
3) To adjust from maximum to minimum setting, turn the knob from to .
4) To switch off the burner return the indicator to ; press the knob and turn the indicator to (burner off)
while holding down the knob. Release the knob.
IF THE BURNER DOES NOT LIGHT, RETURN THE KNOB TO ; PRESS THE KNOB AND TURN THE INDICATOR
TO (BURNER OFF) WHILE HOLDING DOWN THE KNOB. WAIT A FEW SECONDS TO ALLOW THE GAS
EMITTED TO DISPERSE AND THEN REPEAT POINTS 1 TO 3.
TO CHECK THE BURNERS HAVE TURNED ON, LOOK FOR THE FLAME THROUGH THE SLOTS IN THE GRILLS.
1 2 3
4
68