15
ASSEMBLY
TRANSPORT
Transport the machine to the required work area with
the use of a forklift or a lifting hook. The equipment
used for the transportation must be of adequate
capacity to move the sander.
1.
Install the table elevation crank (A) as illustrated.
The slots on the shaft and crank handle must be
aligned. Fasten the crank handle to the shaft with
the pin supplied.
SEE FIG. 1.
Fig. 1
A
MOUNTING SWITCH
Mount switch assembly (A) using two 10mm bolts (B)
as pictured on upper right side of machine.
SEE
FIGS. 2 AND 3.
Fig. 2
Fig. 3
B
A
DUST COLLECTOR CONNECTION
The 26” horizontal drum sander is equipped with two
4” dust chutes. Ring clamps must be used to connect
the dust collection hoses to the chutes.
NEVER ATTEMPT TO OPERATE YOUR MACHINE
WITHOUT A DUST COLLECTOR ATTACHED AND
RUNNING!
WARNING
!
Summary of Contents for 55220
Page 28: ......
