SECURING PLANER TO
A TABLE OR WORKBENCH
During operation, if there is any tendency for the planer
to tip over, slide or walk, the planer MUST be secured
to a supporting surface such as a workbench or table.
Four holes are provided (2 are shown at (A)) to secure-
ly mount the planer. The surface you are mounting the
planer to should be perfectly flat. SEE FIG 3.
Fig. 3
A
16
ASSEMBLY
ATTACHING DEPTH
ADJUSTMENT HANDLE
MAKE CERTAIN THAT THE MACHINE IS DISCON-
NECTED FROM THE POWER SOURCE.
WARNING
!
1.
Attach the depth adjustment handle (A) to the shaft
(B) and fasten in place with 1 Hex Soc Head
screw. Tighten screw using supplied hex wrench.
SEE FIG 1.
Fig. 1
Fig. 2
ATTACHING DUST PORT
The Dust Port is to be used when the planer to be
connected to a dust collector. It has a 4” port on it to
accomodate most dust collection systems.
To install:
1.
Install the dust port in the rear of the planer by
tigthening the soc head cap screws. (4) supplied.
SEE
FIG
2.
A
B
All manuals and user guides at all-guides.com
all-guides.com
Summary of Contents for 40300H
