16
745.089 | 11.30
EN
Operation
Switch the output on and off as follows ( ):
1. Press
SET
. The switching state flashes.
2. Press
to change the switching state.
3. Press
SET
to adopt the change.
Display the current temperatures, flow rate values and operating hours as follows:
1. Press
ESC
. The temperature/flow rate/operating hours are displayed and the associ-
ated component flashes ( , display is not illustrated).
2. Press
to select a different component.
3. Press
SET
to leave the display.
SET
SET
SET
SET
SET
ESC
33
2
6.4
“Automatic” mode
Functionality
Automatic
is the normal mode of operation and the system is automatically controlled.
The following actions are possible:
• Display status (status display): Display the status of external components (tempera-
tures, switching states, run times).
• Display stored min./max. values (temperature sensors) or sum/difference values (op-
erating hours
1)
of the pumps and valves)
Summed values
(symbol
∑
): Operating hours since first commissioning. Summed
values cannot be reset.
Difference values
(symbol
Δ
): Operating hours since the last reset to 0.
• Reset the stored min./max./difference values.
• Call up the settings menu.
1)
Summed switch-on times of the output
Summary of Contents for TF B001
Page 23: ...23 745 089 11 30 EN Notes...
Page 24: ...24 745 089 11 30 EN 745089...
