Optional Steamist Splitter
for Two Controls
Modular Jack
Protective Covering
“Remove Before
Installation”
Plug
Optional Auto
Drain Connection
Knockout
for Auto Drain
¾" Steam
Outlet
Safety
Relief
Valve
Water Inlet
⅜
" Compression
Fitting
½" Outlet
When not equipped
with Auto Drain leave
drain line capped
and closed
Printed
Circuit
Board
Water
Level
Probe
Terminal Strip
for Auto Drain
Connection
®
®
®
Test Switch
Before starting, insure that the conditions of the following checklist have been met:
The proper size Steam Generator has been selected by
using the sizing page in the “Full Line Brochure,” “Pricing
Guide,” or “The Generator Sizing Guide” in the Residen-
tial Systems/Steambath Product Information section of
the Steamist website - www.steamist.com.
CAUTION: An improperly sized Steam Generator will
NOT produce the amount of steam necessary to reach
selected temperature.
The proper voltage Steam Generator has been selected
(i.e., 208V or 240V). A 208V Generator operating on
240V will damage the heating element, and a 240V
Generator operating on 208V will result in a 25% loss
of power.
The Steam Generator is installed in an upright position.
The proper sized 90°C copper wire and circuit breaker
have been used.
The circuit breaker is NOT a GFI (Ground Fault
Interrupter) type.
The Steam Generator is properly grounded.
The circuit breaker or disconnect switch is on.
Water supply is open to the Steam Generator.
Electrical Installation Instructions
Checklist
Model: SM-11
Figure 2 - Major Electrical Components
05/11
Pub. No. 327-M
- 2 -
