background image

ENGLISH  |  3

Questions or comments?

 

steamfast.com

• 

[email protected]

 

1-800-711-6617

Speak your mind! We invite you to review this product online:
steamfast.com/reviews

rated for less amperage may overheat. Care should be taken to arrange the cord so that 
the cord cannot be pulled or tripped over.

13. 

This GARMENT STEAMER is for use with a 120 volt electrical outlet. The cord has a plug 

as shown at A in Figure 65.1. An adapter, as shown at C, can be used to connect three-
blade grounding-type plugs to two-slot receptacles (it is not included with your product). 
The green grounding lug extending from the adapter must be connected to a permanent 
ground such as a properly grounded outlet box. An adapter should not be used if a 
three-slot grounded receptacle is available. *NOTE: A TWO-PRONG ADAPTOR IS NOT 
INCLUDED WITH THIS PRODUCT.

WARNING:

 Changes or modifications to this unit not expressly approved by the party 

responsible for compliance could void the user’s authority to operate the equipment.
 

FCC CONSUMER ADVISEMENT:

 This equipment may generate, use and/or radiate radio 

frequency energy that may cause harmful interference to radio communications. If this 
equipment does cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to contact Steamfast 
Consumer Service at 1-800-711-6617.
 

SAVE THESE INSTRUCTIONS

Figure 65.1

Summary of Contents for SF-680















Reviews: