© STEALTH 2000
FUSE
The amplifer is equipped with a plug-in auto fuse protecting set against
fault conditions. Do not use a fuse with a higher value and never bridge
the fuse over, as this may lead to non-reparable damage so that any claim
GAIN = INPUT LEVEL CONTROL
The input level control allows the system to work well within a wide range
of output levels. Choose the adjustment in the way that you achieve a
sound most possibly without any distortion. As a guideline the following
procedure is recommended:
Tune in the volume of your car radio to 2/3 of the maximum
volume. Now turn the gain control of the amplifier from „min“ to „max“
direction until you can hear distortions. Then turn the level control a little
back to „min“. The gain control adjustment is finished now.
LOW PASS VARIABLE CROSSOVER
If a subwoofer has been connected to the amplifier, this active Subwoofer
Box can be run through a low pass filter on an optimum frequency range.
For this purpose, frequency has to be turned to 50 Hz or 250 Hz.
BASS-BOOST (FIRE)
Increases the bass level adjustable from 0 - 12dB.
Page 6
