© STEALTH 2000
INTRODUCTION
Before installing the active Subwoofer Box please read this instruction
manual
carefully. The instructions for mounting and connecting the set have to be
followed precisely. If necessary, a service centre should be consulted.
All connections for DC power, signal input and speaker outputs can be
carried out easily and safely by way of RCA and screwed terminals.
CONNECTIONS
LOW LEVEL IN = CINCH / RCA INPUTS
If your car radio is equipped with a pre-amplifier output (Cinch/RCA or
DIN), connect the Cinch/RCA input connectors of the amplifier with the
pre-amplifier output connectors of your radio. Take care of correct channel
order.
HIGH LEVEL IN = SPEAKER IN
In case your car stereo is not equipped with a pre-amplifier output you
should connect the car stereo speaker outputs through the white 4-pin
connector. Please take care for correct polarity connection. Wrong
connection can destroy the output stage of your car-stereo.
GND (-) = GROUND CONNECTION
Connect the Gnd terminal to the chassis ground of your car and take care
of best electric and mechanic contact. In doing so, drill a hole into the car
chassis near the amplifier, then remove colour, dirt or any other substance
from the ground point. After that, fasten the cable end with added ring
Page 4
