In-Wall SubwooferC 1002
®
www.parasound.com
I N S T A L L A T I O N G U I D E
Page 1: ...In Wall Subwoofer C 1002 www parasound com I N S TA L L AT I O N G U I D E ...
Page 2: ...ichever is easier for you Hold a level against the edge of the template to insure the cutout will be parallel to the ceiling or floor Trace the cutout guide with a pencil 3 Before making the final cutout make a smaller test cutout in the center of the penciled outline Reach inside the test hole to verify that there are no obstructions 4 Score the drywall with a razor knife and use a keyhole saw to...
Page 3: ...driver and baffle You can also paint the grill Before painting remote the white masking material which is attached at the corners on the rear side of the grill If you don t remove this paint will get stuck and block the sound When you paint the grill blow lightly against the grill to prevent paint from clogging the perfor ated holes Reattach the white material after the paint is dry ...
Page 4: ...S Power Range 10 200 Watts Each Channel Driver Size 10 Driver Size metric 25 4 cm Driver Cone Material Plasticized Non Pulp Paper Driver Surround Material Butyl Rubber Driver Magnet Weight 70 Ounces 2 07 Kilograms Driver Magnet Material Ferrite With Vent Dimensions Minimum Depth 31 2 Behind Front Surface Of Wall Minimum Depth metric 88 mm Behind Front Surface Of Wall Hole Cut Out 105 8 x 105 8 Hol...