background image

3

Hot Surface

Flying Objects

Warning

Electrical Shock

Toxic Fumes

Operator's Manual

Bursting

Fire

SAFETY GUIDELINES

Important Safety Information

Safety Symbols and Meanings

The manufacturer cannot possibly anticipate every possible circumstance that might involve a hazard. 

The warnings in this manual, and the tags and decals affixed to the unit are, therefore, not all-inclusive. 

If you use a procedure, work method, or operating technique that the manufacturer does not 

specifically recommend, you must satisfy yourself that it is safe for you and others. You must also make 

sure that the procedure, work method, or operating technique that you choose does not render the 

compressor unsafe.

The safety alert symbol indicates a potential hazard to personal injury. A signal word (DANGER, 

WARNING, or CAUTION) is used with the alert symbol to designate a degree or level of hazard 

seriousness. A safety symbol may be used to represent the type of hazard. The signal word 

NOTICE is used to address practices not related to personal injury.

DANGER: Indicates a hazard which, if not avoided, will result in death or serious injury.
WARNING: Indicates a hazard which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a hazard which, if not avoided, could result in minor or moderate injury.
NOTICE: Address practices not related to personal injury.

Summary of Contents for 3331081
















Reviews: