Stealth 3300381, Operator'S Manual

Page: 9 / 15

9
OPERATING INSTRUCTIONS
Fig J
Fig K
2
1
OFF
ON
Fig L
1
3
2
Before each start-up
1.Set the ON/OFF switch (1) to the OFF position (Fig H).
2.Turn the air pressure regulator knob (1) counter-clockwise until it stops (Fig I).
3.Attach hose and accessories (Fig J).(Hose and accessories need to be purchased
How to start
How to shut down
5.
Close the tank drain valve (Fig K).
Plug-in the power cord (2) (Fig K).
Set the ON/OFF switch to the ON position and allow the tank
pressure to build. Motor will stop when tank pressure reaches
cut-out pressure.
Turn the air pressure regulator knob clockwise until desired
pressure is reached.
The compressor is ready for use.
Set the ON/OFF switch (1) to the OFF position.
Unplug the power cord (2).
Reduce the pressure in the tank through the outlet hose. Pulling
the safety valve ring (3) and keeping it open will also reduce the
pressure in the tank (Fig L).
Set the tank drain valve (1) to ON to ensire tank is drained (Fig K).
2.
3.
4.
separately.)
1.
4.
3.
2.
1.
Fig H
OFF
1
Fig I
1