Installation Instructions
9.0
10
Defining Position (Parameters)
9.5
If the Multi Joystick is not mounted with the jack connections at the right hand side, you can adjust
the joystick direction in steps of 90° with the mo-Vis Configurator Software.
•
This software must be installed and ready to use on a PC.
•
Depending on your profile (User, Attendant, Dealer, OEM), you will be able to change a number
of parameter settings.
•
To define the movements during the installation procedure, we advise having at least a dealer
profile.
To define the parameter settings, proceed as follows:
•
Connect the Multi Joystick Unit to a PC. Use a standard mini-USB cable.
•
Configure the parameters with the software.
•
Upload the configuration.
•
Test the configuration and adjust, if necessary.
Please see "Settings" for a list of all parameter settings. (Section 12.3, Page 28):
•
The mo-Vis Configurator Software is optional to download. The joystick and its settings can be
configured through the chair's display.
Defining Parameter Settings
9.6
Parameter Settings
9.7
WARNING
Ensure all cabling is mounted in such a way
as to avoid excessive wear and tear.
•
If required, place a power on/off (pwr) and/or mode (in) switch, secure their cabling and insert
their connections.
•
You can use the connections on the Interface Unit.
•
Connect the cabling to the wheelchair electronics.
