2
Installation Instructions
Installation Notes
▪
To bend the cable, we recommend a bend radius that is at least
6.6mm (.26 in).
▪
Do not bend the edge of the fiber units closest to the tip and sensor.
▪
When wiring the cable, do not subject the cable to a tension greater
than 9.8N maximum.
▪
Do not compress or place heavy loads on the fibers. The method
shown below may be an effective method to secure the fiber to the
chair, while avoiding excessive load (29.4N max.).
▪
The method shown below is an effective way to prevent the fiber
from breaking due to vibration.
Fiber Unit
Amplifier Unit
✓
✗
20mm min.
20mm min.
✓
✗
Fiber Unit
Nylon Wire Holder
Forming one-turn
loop will reduce
vibration
Tape
