5
Installation Instructions
Locking the Cable in the Amplifier
1.
Open the lock lever by releasing it away from the fiber cable receiving
holes.
2.
Insert the fiber cable into the receiver hole until it bottoms out. Do not
force it past this point.
3.
Close the lock lever by flipping it toward the receiver holes.
▪
The fiber sensor end of the fiber cable must be properly mounted to
ensure proper function. Once the location has been determined, use
the supplied nuts and washers to mount the sensor. The image
below shows an example of the correct mounting.
Note:
Do not exceed a clamping force of .78 N·m on the mounting nuts.
Note:
Use a properly-sized 3mm wrench to avoid damage to sensitive
parts.
Locked
Unlocked
Receiver
holes
Protective Cover
Mounting Plate
Toothed Washers
Nuts
(attachment)
