10
Installation Instructions
R-Net Programming
R-Net
Install the Switch Box and secure to the chair. Plug the female 9-pin into Port 1 or
Port 2 on the Omni Display. If using the 6 Switch Box, Plug the power mono plug
into the power port on the Omni.
1.
Connect the programming dongle.
2.
Press
Mode (M)
on the Omni until you reach the
On Board Programming
(OBP)
3.
Select
Omni.
4.
Select
Port 1
or
Port 2.
5.
Set
SID
to one of the following
a.
Swi-
if using switches for both
Forward & Reverse.
b.
3Swi-
if not using a
Reverse
switch.
Mode
Switch
mode
to
drive,
power seating, or OBP
(On-Board Programming)
Profile
Switch
between
preset
drive profiles and activate
device as control.
Power
Turns chair
ON/OFF
.
Navigation
Up & Down button
to
navigate
the
menus.
Right
button to open a
menu item and Left
button to return to
previous menu.
Plus & Minus
Toggles
settings
or
changes value of the
highlighted parameter.
