9
Installation Instructions
Q-Logic 2
Install the Switch Box and secure to the chair. Plug the female 9-pin into the
Enhanced Display. If using an SCIM, plug the 9-pin into the SCIM module. If using
the 6 Switch Box, plug the power mono plug into the
On/Off
jack on the hand
control.
1.
Plug the Q-Logic programmer (HHP) into the back of the display.
2.
On the HHP, select
Program Adjustments.
3.
In the
Program Adjustments
menu, select
Specialty Control.
4.
Set
Active Device
to one of the following according to the number of switches
and locations installed:
a. 2 Switch
b. 3 Switch
c. 4 Switch
d. 5 Switch
e. 3 Switch Head
f. 4 Switch Head
g. 5 Switch Head
Q-Logic 3
Install the 6 Switch Box and secure to the chair. Plug the female 9-pin into the
Enhanced Display. If using an SCIM, plug the 9-pin into the SCIM module. If using
the 6 Switch Box, plug the power mono plug into the
On/Off
jack on the hand
control.
1.
Plug the Q-Logic programmer (HHP) into the back of the display.
2.
On the HHP, Select
Program Adjustments.
3.
In the Program Adjustments menu, select
Enhanced Display
or
SCIM
.
4.
Go to
Input Configuration
. Set this to one of the following according to the
number of switches and locations installed.
a. 2 Switch
b. 3 Switch
c. 4 Switch
d. 5 Switch
e. 3 Switch Head
f. 4 Switch Head
g. 5 Switch Head
