6
Installation Instructions
Installing Switch Box to the Chair
Step One:
Using a 5/32" T-Handle, loosen the 1/4-20 x 1/2" Button Head Screws
(4).
Step Two:
Angle the T-Nuts (1) so that they are parallel with the desired track
location.
Step Three:
Slide the i-Connect through the track.
Step Four:
Align the i-Connect on the correct location on the track, tighten the
1/4-20 x 1/2" BHS (4) with the 5/32" T-Handle to 125 in-lbs of torque.
Step Five:
Route the wires as needed being sure that they will not be located in a
path which will cause them to be crushed, stretched, or sliced.
WARNING
Ensure that excess wires do not hang or could be
tangled with the user or other equipment.
STEP
1
STEP
3
STEP
4
STEP
2
STEP
5
