STC-WD3
www.stealthcam.net
Toll Free 877-269-8490
18
•
Use the UP and DOWN buttons to select additional program
settings or press [MENU] again to exit the SETTING SCREEN.
Set the Time out:
•
Press the [UP] or [DN] button to highlight TIME OUT.
•
Press [OK] to enter the setting.
•
Press [UP] or [DN] button to set the desired time out in minutes
(one minute increments from 1-10 and five minute increments
from 10 to 60 minutes).
•
Press [OK] again to save the setting. This will return you to the
SETTING SCREEN menu.
•
Use the UP and DOWN buttons to select additional program
settings or press [MENU] again to exit the SETTING SCREEN.
If no buttons are pressed within 30 seconds, the unit will return 1-
minute count down mode then start PIR capturing.
