STC-WD3
www.stealthcam.net
Toll Free 877-269-8490
31
Using the camera by manual shoot.
•
Open the front housing and turn the camera on.
•
Program the capture mode to manual (Please refer to Program
& Set up section on page 11 of this manual)
•
Close the front housing.
•
The camera is now ready to be used as hand held point and
shoot camera.
•
Use the optical viewfinder to align your shot then press the
shutter button.
•
When taking nighttime pictures allow approximately 6 seconds
between shots to allow the flash to charge. In case of low
battery power, it will take longer to charge the flash between
pictures.