Stealth Cam STC-U840IR, Instruction Manual

Page: 12 / 36

WWW.STEALTHCAM.NET
Toll Free 877-269-8490
12
Inserting SD memory card
NOTE: Make sure camera is in the OFF position whenever adding or
removing memory.
•
Insert SD memory card in to the SD card slot completely and in
the correct direction as shown by the sticker located at the side of
the housing.
•
To remove the SD memory card, depress the SD card and pull out
the card gently.
•
SD cards must be clean (no images from other sources). If you are
using the SD card from other cameras, please make sure to format
the SD card in your computer prior to use in your camera. New
cards are good to use straight from the package.
FORMAT – Definition: When you format a SD memory card, the
operating system erases all information and files on the card. Then it
creates an internal address tables that it later uses to locate
information and files. Formatting also removes all Hidden System files
as well. Basically it cleans your SD memory card just like if it was brand
new. Please make sure to follow the guidelines listed below:
SD Card size: 2Gb or below, format using File System type
“ FAT ”.
SD Card size: 4GB or above, format using File System type “ FAT32” .
Do not use File System type “NTFS” or “exFAT” , these formats are not
supported.