Stealth Cam stc-g26ng, Instruction Manual

Page: 19 / 59

www.stealthcam.com Page
877-­‐269-­‐8490
19
CAMERA PROGRAMMING -­‐ CUSTOM (CONT)
press the ENTER button and the camera will now engage this feature. Pressing the DOWN
arrow key will move to the security key configuration.
o
SECURITY KEY – 0000 (default): To change the key to an owner operated one press the
ENTER button. With this option blinking, use the UP or DOWN arrow buttons change the
first digit to the preferred number or letter. Then using the LEFT button, move to the
second digit and change it to the preferred number or letter as well. Continue this until
all 4 digits are correctly set. Finally press the ENTER button to secure the new code.
NOTE: The camera owner is responsible for remembering the code. Should the code be
forgotten the owner must call in to Customer Service (877-­‐269-­‐8490) for directions on getting
the unit restored to factory default. In order for the owner to be authorized for the reset, this
camera must be registered with StealthCam.
FORMAT CARD – NO (default): This setting is used to format the SD memory card installed. With
this option blinking, pressing the UP or DOWN arrow buttons will cause the camera to cycle between
the two options of NO or YES. When the YES option is chosen and the ENTER button is press the
camera will format the card, deleting any previous information that was on the card. Pressing the
DOWN arrow key will move the display back to the starting option of SETUP DATE. (See page 22 for
more details.)