Stealth Cam stc-g26ng, Instruction Manual

Page: 14 / 59

www.stealthcam.com Page
877-­‐269-­‐8490
14
CAMERA PROGRAMMING -­‐ CUSTOM (CONT)
§ VIDEO RES – 720 x 480 (default): This setting is used to determine the resolution of
each video taken by the camera. With this option blinking, use the UP or DOWN
arrow key to move between the options of: 720 x 480 or 1280 x 720. The higher the
resolution of a video the more space the file will take on the SD memory card.
§
VIDEO LENGTH – 010 S (default): This setting is used to determine the length of
time, in seconds, of the video recording. This setting can be changed between the
numbers of 10 to 180. With this option blinking, use the UP or DOWN arrow key to
move between the value range in increments of 5. The maximum night video is 30
seconds to conserve the batteries.
§ VIDEO AUDIO – ON (default): This setting is used to determine if the camera should
record audio (sound) with its video recording. With this option blinking, pressing the
UP or DOWN arrow buttons will cause the camera to cycle between the two options
of ON or OFF.
o
TL (Time Lapse): In this mode the camera will take a designated amount of pictures with a
designated time out between the designated hours of operation even if there is no
activity in front of the camera.
§ PHOTO RES – 4.0 MP (default): This setting is used to determine the Megapixel
resolution of each image taken by the camera. With this option blinking, use the UP
or DOWN arrow key to move between the options of: 8.0 MP, 4.0 MP, 2.0 MP or .5
MP. The higher the resolution of an image the more space the file will take on the
SD memory card.