STC-DVIRHD
www.stealthcam.net
Toll Free 877-269-8490
22
When you have completed testing the coverage area,
there are 2 methods to exit the test mode:
a. Option 1: Open the front housing and press the
[TEST] button to exit test mode. The camera will
then enter countdown mode for 1 minute and the
front green indicator will start blinking, giving you 1
minute to leave the coverage area. The camera will
then enter PIR detection mode.
b. Option 2: As a safety precaution, if you did not push
the test button to exit the test mode as shown in
option 1 above, the camera will automatically enter
the 1 minute countdown mode after it is left in test
mode for 5 minutes. Camera will then enter PIR
detection mode.
