STC-DVIRHD
www.stealthcam.net
Toll Free 877-269-8490
23
Using the camera in PIR detection mode:
Mount the camera to tree or other sturdy object using
either a tree screw (optional accessory) or supplied
mounting strap (You may refer to the mounting
suggestions section in this manual).
Open the front housing and move the switch to the ON
position. At this point, you have 30 seconds to make any
program adjustments.
After 30 seconds the camera’s green LED light will begin
blinking and enter count down mode. This is your
indication to leave the coverage area within one minute.
After one minute, the camera will enter either image
burst mode or adjustable video mode based on your
program setting. The camera will then time out between
1 ~ 59 minutes, depending on your setting.
The time between motion detection and the camera
taking the pictures may vary due to lighting conditions,
program settings, and battery power level.
The IR Emitter will only activate in low light conditions.
