b
a
b
a
5 of 13
www.stcny.com
5
attach
Tighten screws so brackets are firmly attached.
DO NOT OVER TIGHTEN. Over tightening may
damage your display.
!
Center brackets vertically to back of display.
Measure the horizontal width between holes.
Bracket placement for
maximum width d.
Bracket placement for
maximum width c.
a = b
c = between 3.9 “ (100mm) to 22.5” (575mm)
d = between 22.6” (576mm) to maximum 26.3” (668mm)
2
1
NOTE: The following steps illustrate attaching the brackets for maximum width c. When your
maximum width is d, reverse bracket placement so the top adjustment faces the inside as shown
above. Follow instructions to attach to display and mount. See step 13 for adjustment instructions.
top
left
top
right
top
left
top
right
OR
OR
b
a
b
a
c
flat
flat
curved or recessed
curved or recessed
OR
d
