12
13
12 of 13
www.stcny.com
secure
adjust
Secure both display brackets to bottom of extension arm assembly front
plate with phillips screw driver.
Secure both display brackets to bottom of extension
arm assembly front plate with phillips screw driver.
!
Use two or more people
when adjusting display.
Tilt display from level
to minus 15 degrees.
Tighten screws firmly when you finish. DO NOT OVER TIGHTEN.
!
Loosen screw on display brackets to rotate
and adjust tilt.
NOTE: When brackets are positioned for
maximum width as shown in step 5, loosen
screw on inside to rotate and adjust tilt.
Mount pivots 180 degrees at each joint.
/
15
º
º
0
Hold display before loosening screws. Continue
to hold until you have tightened the screws again.
!
Tighten screws firmly. DO NOT OVER TIGHTEN. Overtightening
can damage bolts and greatly reduce holding power.
!
