background image

TABLE OF CONTENTS

1 of 13

www.stcny.com

!

!

A WARNING alerts you to the possibility of serious injury or death if you do not follow the 

corresponding instructions.

A CAUTION alerts you to the possibility of damage to or destruction of the equipment if you 

do not follow the corresponding instructions.

Failure to provide adequate structural strength for this component can result in physical 

injury and/or damage to equipment. It is the installer’s responsibility to make sure the 

structure to which this component is attached can support four times the combined weight 

of all equipment. Reinforce the structure as required before installing the component.

Improper installation can result in serious physical injury. This mount has been tested to 

support 105 lbs (47.7 kgs.) Do not exceed that weight. 

Safety measures must be observed at all times during the installation of this product. Use 

proper safety gear and tools during the installation process to prevent physical injury.

Do not install on a structure that is prone to vibration, movement or chance of impact. 

Doing so could result in damage to the flat panel display and/or mounting surface.

Do not install near a heater, fireplace, direct sunlight or any other source of direct heat. 

Doing so could result in damage to the flat panel display and could increase the risk of fire.

WARNING:

WARNING:

WARNING:

WARNING:

CAUTION:

CAUTION:

CAUTION:

warnings and cautions  ..........................................................................       

unpack

   ...................................................................................................................      

required tools   ...........................................................................................      

identify display back style, screw diameter and length   ...........

select and test components   ................................................................       

attach brackets to display  .....................................................................     

wall placement  .........................................................................................     

attach to wood stud   ...............................................................................     

attach to masonry walls   ........................................................................     

secure wall plate to wall   ........................................................................

attach extension arm assembly to wall plate    ...............................

mount display to wall plate   .................................................................  

secure display  ............................................................................................  

adjust   ...........................................................................................................

warranty   .....................................................................................................  

1

2

2

3

4

5

6

7

8

9

10

11

12

12

13

BEFORE YOU BEGIN, MAKE SURE YOU CAREFULLY READ AND UNDERSTAND THE INSTRUCTIONS IN THIS 

MANUAL. This bracket system incorporates a slip on mount design. Our goal is to make this installation 

easy for you.  Please follow the instructions in the order presented in this manual and be sure to observe 

all warnings and cautions.

!

!

IMPORTANT WARNINGS AND CAUTIONS!

Summary of Contents for SPACE SAVER 30504














Reviews: