8
ENGLISH
8
Battery power indicator
The screwdriver has a battery indicator, it is very easy to show the battery capacity, only need to
press the button (8) when you want to check it, green/yellow/red light showed the battery power
full or low.
Light
The screwdriver has a light, switch on the light switch (7) to lighten the place where you will drill
or screw, push the switch (7) to turn on the light.
Manual operation
The screwdriver has automatic spindle lock function. This setting enables tight screw to be
turned manually.
Care and maintenance
Clean the housing only with a damp cloth - do not use any solvents! Dry thoroughly afterwards.
In order to maintain battery capacity, we recommend the battery to be completely discharged
every two months and recharged again. Only store full charged batteries and top-up the charge
from time to time. They should be stored in a dry and frost-free place, the ambient temperature
should not exceed 50 °C.
Important: Protect environements
Do not throw used NC batteries into fire or water-danger of explosion! Hand in used and faulty
batteries to your local waste disposal.
Service hints
Store the machine, operating instructions and where necessary the accessories in the original
packaging. In this way you will always have all the information and parts ready to hand. Do not
drop electrical machine in water. Please note additional hints given in the operation instructions.
Pack device well or use the original packaging in order to avoid transit damage.
DISPOSAL ONLY FOR EUROPEAN UNION COUNTRIES (EU)
The product cannot be disposed as unsorted municipal waste. It must be collected
separately to prevent negative environmental impacts. In accordance with the proce-
dures of Directive 2002/96 CE and relevant national laws and regulations adopted
pursuant to this Directive on the disposal of waste at the end of the life cycle of the
product, any violation is sanctioned by law. Please inform yourself about the local
separate collection system for electrical and electronic products.
SERVICE AND WARRANTY
This product is guaranteed in accordance with statutory country specific regulations. Damage
due to normal wear and tear, overload or improper handling will be excluded from the guarantee.
All repairs must be carried out by a
authorised service provider, or order in:
STAYER
This product is in conformity with the following regulations and related standards:
Area Empresaríal Andalucía - Sector I
Calle Sierra de Cazorla nº7
C.P: 28320 Pinto (Madrid) SPAIN
Email: [email protected]
Ramiro de la Fuente
Director Manager
EN/IEC 60745
2006/42/CE
2004/108/CE
2006/95/CE
