8 Faults
34 / 40
Mobile Filter System
www.stauff.com
8 Faults
8.1 For your safety
WARNING
Remedying faults
Severe injuries or machine damage
► Troubleshooting only by personnel who are authorised and qualified to
do so!
► Wear the relevant personal protective equipment during all work on the
machine!
WARNING
Work on electrical equipment
Serious or fatal injury due to dangerous voltage
► Work on electrical equipment may only be carried out by qualified
electricians!
► Work on live parts may only be carried out under the supervision of a
second person!
Mechanical parts in the hazard area of the machine can cause a malfunction
in the process due to poor maintenance or continuous use (e.g. by
jamming). Note the following for malfunctions in the hazard area:
• Before troubleshooting in the hazard area, switch off and depressurise
the machine if possible.
• Note that any stored residual energy on clamped parts can cause
uncontrolled movements.
• Use tools or other means to prevent injuries to limbs.
8.2 Procedure for troubleshooting
u
How to proceed in the event of a fault:
1. Determine the subassembly in which the fault is present.
2. Check the cause of the fault on the corresponding display element.
3. Eliminate the cause of the fault and replace defective components if
necessary.
4. If you cannot identify surely the cause of the problem, contact the
manufacturer.
